Answering System FeaturesFor assistance, please visit http://www.panasonic.com/consumersupport 61Answering system commandsYou can also operate the answeringsystem by pressing dial keys.To use the following commands, press{MENU} (middle soft key), then press{PLAY}.*1 If pressed within the first 5 seconds of amessage, the previous message will beplayed.*2 To resume operation, press a commandkey within 15 seconds, or the voiceguidance will start.Calling back (Caller ID subscribersonly)If Caller ID information was received forthe call, you can call the caller back whilelistening to a message.Press {CALL} during playback.Note:L To edit the number before calling back,press {EDIT} repeatedly to select thedesired format (page 35), then press{CALL}, {C}, or {s}.Recording a voice memoYou can use the base unit to leave a voicememo (voice message) for yourself orsomeone else (max. 3 minutes). Voicememos can be played back later with thesame operation used to play backanswering system messages.1 Press {MEMO}.2 After the unit beeps, speak clearlyabout 20 cm (8 inches) away from theMIC.L The display will show the elapsedrecording time.3 To stop recording, press {MEMO} or{STOP}.Note:L Voice memos are treated as newmessages.L If your memo message is less than 1second long, the unit beeps 6 times andannounces, “Your message was notrecorded. Record your message again.”L When voice memos are played on thehandset, “MEMO” will be displayed.Key Command{1} or {<} Repeat message (duringplayback)*1{2} or {>} Skip message (duringplayback){4} Play new messages{5} Play all messages{8} Turn answering system on{9} Stop playback*2{0} Turn answering system off{CLEAR}or {*}{4}Erase this message (duringplayback){*}{5} Erase all messages