Panasonic KX-TG6481FX Operating Instructions Manual

Also see for KX-TG6481FX: Quick guide

Programming24Special programmingAlarmYou can set one of 2 different alarmoptions (once or daily) at a time for eachhandset. An alarm sounds at the set timefor 3 minutes.Important:L Set the date and time beforehand(page 15).1 K (middle soft key)2 {V}/{^}: “Handset Setup” iM3 {V}/{^}: “Time Settings” iM4 {V}/{^}: “Alarm” i M5 {V}/{^}: Select the desired alarmoption. i M6 Set the desired time. i M7 {V}/{^}: Select the desired alarmtone. i M 2 timesL We recommend selecting adifferent ringer tone to the oneused for outside calls.8 {ic}L When the alarm is set, E isdisplayed.Note:L You can skip to step 4 by pressing{R/E} in standby mode.L To stop the alarm, press any dial keyor place the handset on the base unitor charger.L When the handset is in use, the alarmwill not sound until the handset is instandby mode.L If you select “Once”, the settingchanges to “Off” after the alarmsounds.Changing the base unit PIN(Personal IdentificationNumber)Important:L If you change the PIN, please makenote of your new PIN. The unit will notreveal the PIN to you. If you forgetyour PIN, contact your nearestPanasonic service centre.1 K (middle soft key)2 {V}/{^}: “Base Unit Setup” iM3 {V}/{^}: “Base Unit PIN” iM4 Enter the current 4-digit base unitPIN (default: “0000”).5 Enter the new 4-digit base unit PIN.i M i {ic}Changing the unit’s regionsetting/Resetting the baseunit1 K (middle soft key)2 {V}/{^}: “Base Unit Setup” iM3 {V}/{^}: “Country” i M“Off”Turns alarm off. Press M again,then press {ic} to exit.“Once”An alarm sounds once at the settime. Enter the desired date andmonth.“Daily”An alarm sounds daily at the set time.TG6481FX(e).book Page 24 Friday, June 5, 2009 8:50 AM