Programming27Deregistering a handsetA handset can cancel its ownregistration (or the registration ofanother handset) that is stored to thebase unit. This allows the handset to endits wireless connection with the system.1 K (middle soft key)2 {V}/{^}: “Base Unit Setup” iM3 {3}{3}{5}4 {V}/{^}: “Deregistration” iML The numbers of all handsetsregistered to the base unit aredisplayed.5 Select the handset(s) you want tocancel by pressing the desiredhandset number. i ML The selected handset number(s)flashes.L To cancel a selected handsetnumber, press the number again.The number stops flashing.6 {V}/{^}: “Yes” i ML A confirmation tone sounds aseach handset numberdisappears.L The handset does not beep whencancelling its own registration.7 {ic}Increasing the range of thebase unitYou can increase the signal range of thebase unit by using a DECT repeater.Please use only the Panasonic DECTrepeater noted on page 3. Contact yourPanasonic dealer for details.Important:L Before registering the repeater to thisbase unit, you must turn the repeatermode on.L Do not use more than one repeater ata time.Setting the repeater mode1 K (middle soft key)2 {V}/{^}: “Base Unit Setup” iM3 {V}/{^}: “Repeater Mode” iM4 {V}/{^}: Select the desired setting.i M i {ic}Note:L After turning the repeater mode on oroff, w flashes on the handsetmomentarily. This is normal and thehandset can be used once w stopsflashing.TG6481FX(e).book Page 27 Friday, June 5, 2009 8:50 AM