Panasonic KX-TG6481FX Operating Instructions Manual

Also see for KX-TG6481FX: Quick guide

Answering System37Calling back (Caller IDsubscribers only)If caller information is received for thecall, you can call the caller back whilelistening to a message.1 Press K during playback.2 {V}/{^}: “Call Back” i MEditing the number before callingback1 Press K during playback.2 {V}/{^}: “Edit and Call” iM3 Edit the number. i {C}Erasing all messages1 K (middle soft key)2 {V}/{^}: “Answer System” iM3 {V}/{^}: “Erase All Msg.” iM4 {V}/{^}: “Yes” i M i {ic}Remote operationUsing a touch-tone phone, you can callyour phone number from outside andaccess the unit to listen to messages orchange answering system settings.Remote access codeA 3-digit remote access code must beentered when operating the answeringsystem remotely. This code preventsunauthorised parties from listening toyour messages remotely.Important:L In order to operate the answeringsystem remotely, you must first set aremote access code.1 K (middle soft key)2 {V}/{^}: “Answer System” iM3 {V}/{^}: “Settings” i M4 {V}/{^}: “Remote Code” i M5 To turn on remote operation, enterthe desired 3-digit remote accesscode.L To turn off remote operation,press {*}.6 M i {ic}Using the answering systemremotely1 Dial your phone number from atouch-tone phone.2 After the greeting message starts,enter your remote access code.L The unit announces the number ofnew messages.3 Enter remote commands.4 When finished, hang up.Note:L You can also leave a message just asany outside caller can. After thegreeting message starts, press {*} toskip the greeting message and recordyour message after the beep.*1 If pressed within the first 5seconds of a message, theprevious message is played.*2 You can also erase as follows:W i {V}/{^}: “Yes” i M*3 Unit resets to a pre-recordedgreeting message.TG6481FX(e).book Page 37 Friday, June 5, 2009 8:50 AM