Making/Answering Calls18Useful features during acallHoldThis feature allows you to put an outside callon hold.1 Press 8 during an outside call.2 {r}: “Hold” s M3 To release hold, press {C}.L Another handset user can take the callby pressing {C}.Note:L If a call is kept on hold for more than 9minutes, an alarm tone starts to sound andthe ringer indicator flashes rapidly. After 1additional minute on hold, the call isdisconnected.L If another phone is connected to the sameline, you can also take the call by lifting itshandset.MuteWhile mute is turned on, you can hear theother party, but the other party cannot hearyou.1 Press 1 during conversation.L 1 flashes.2 To return to the conversation, press 1again.Recall/flash{ECO/R} allows you to use the specialfeatures of your host PBX such as transferringan extension call, or accessing optionaltelephone services.Note:L To change the recall/flash time, see page26.For call waiting or Call WaitingCaller ID service usersTo use call waiting or Call Waiting Caller ID,you must first subscribe with your serviceprovider/telephone company.This feature allows you to receive calls whileyou are already talking on the phone. If youreceive a call while on the phone, you will heara call waiting tone.If you subscribe to both Caller ID and CallWaiting with Caller ID services, the 2ndcaller’s information is displayed after you hearthe call waiting tone on the handset.1 Press {ECO/R} to answer the 2nd call.2 To switch between calls, press {ECO/R}.Note:L Please contact your service provider/telephone company for details andavailability of this service in your area.Temporary tone dialling (forrotary/pulse service users)You can temporarily switch the dialling modeto tone when you need to access touch-toneservices (for example, answering services,telephone banking services, etc.).Press * before entering access numberswhich require tone dialling.Handset equalizerThis feature clarifies the voice of the personyou are talking to, producing a more natural-sounding voice that is easier to hear andunderstand.1 Press 8 while talking.2 {r}: “Equalizer” s M3 {r}: Select the desired setting.4 Press M to exit.Note:L When this feature is turned on, 6 isdisplayed while talking.L Depending on the condition and quality ofyour telephone line, this feature mayemphasise existing line noise. If it becomesdifficult to hear, turn this feature off.L This feature is not available while using thespeakerphone.TG661x_662xFX(e).book Page 18 Wednesday, March 2, 2011 2:31 PM