Panasonic KX-TG6611FX Operating Instructions Manual

SMS (Short Message Service)34Using SMSSMS allows you to send and receive textmessages between other fixed-line and mobilephones that support compatible SMSnetworks and features.Important:L To use SMS features, you must:– subscribe to a Caller ID and/or anappropriate service such as SMS.– confirm that SMS is turned on.– confirm that the correct message centrenumbers are stored.Contact your service provider/telephonecompany for details and availability.Note:L A total of 47 messages (at 160 characters/message) can be saved. Total number maybe more than 47 if length of messages isless than 160 characters/message.L If the unit is connected to a PBX system,you may not be able to use SMS features.Turning SMS on/off1 8(3572 {r}: Select the desired setting. s Ms {ic}Storing SMS messagecentre numbersSMS message centre numbers must be storedin order to send and receive SMS messages.For Czech:The message centre numbers (used for SMSservices provided by Telefonica O2) arepreprogrammed in this unit. You can changethem if necessary.For Slovakia:The message centre numbers (used for SMSservice provided by Slovak Telecom - T-Com)are preprogrammed in this unit. You canchange them if necessary.L Contact your service provider/telephonecompany for more information.L If you change the unit’s region setting/resetthe base unit, the stored message centrenumbers will be deleted or changed (page24). In this case, store the numbers again ifnecessary.1 To store “Message Centre1”:8(351To store “Message Centre2”:8(3522 Edit the number as necessary. s Ms {ic}Note:L For PBX users:– You need to add the PBX line accessnumber and a dialling pause to thebeginning of the Message Centre 1number.– If you only use the Message Centre 1number for SMS, store the MessageCentre 1 number as is (without adding aline access number or dialling pause) toMessage Centre 2.Sending a messageWriting and sending a newmessage1 8(35)2 {r}: “Create” s M3 Enter a message. s ML You can change the character entrymode by pressing / (page 44).4 Enter the destination phone number (20digits max.). s MTo use the redial list:{>} (R) s {r}: Select the phonenumber. s M 2 timesTo use the caller list:{<} (y) s {r}: Select the party. s M2 timesL If > is displayed, not all of theinformation is shown. To see theremaining information, press {>}. ToTG661x_662xFX(e).book Page 34 Wednesday, March 2, 2011 2:31 PM