Panasonic KX-TG7622B Operating Instructions Manual

Also see for KX-TG7622, KX-TG7623, KX-TG762: Operating instructions Quick guide Operating instructions

Contents

Panasonic KX-TG7622B Operating Instructions Manual Manual pdf 20 page image

which unit receives cellular calls”,page 20.R If not required, go to step 5.5 MOFFNNote:R Make sure that your cellular phone isset to connect to this productautomatically. Refer to your cellularphone’s operating instructions.R Make sure you cancel your cellularphone’s current registration if youwant to register it to the other line(page 23).Link to cell settingsSelecting which unit receivescellular callsYou can select which unit rings andreceives calls for a cellular line. When“All” is selected, all handsets and thebase unit ring.1 MMENUN2 For CELL 1: #6271For CELL 2: #62723 MbN: Select the desired handset or“All”.4 MSAVEN a MOFFNNote:R When you select a specific handset toreceive calls for a cellular line:– other handsets cannot answer thecalls.– the base unit can answer the callseven though it does not ring.However, you can make the baseunit ring by adjusting the base unitringer volume (page 41).(KX-TG7641 series: page 3)R When you change the setting to“All”, the base unit ringer volumealso returns to the lowest level even ifthe ringer volume has been changed.Ring as cell modeOnce this feature is turned on, thehandset and base unit ring using thesame ringer tone as your cellular phone.The following settings are available:– “Off”: Turn this feature off to use theringer tones of the handset and baseunit. Caller information is announceddepending on the Talking Caller IDsetting (page 43).– “On (with Talking CID)”(default): The handset and base unituse your cellular phone’s ringer tone.Caller information is announced evenif the Talking Caller ID is turned off.– “On (without Talking CID)”:The handset and base unit use yourcellular phone’s ringer tone. Callerinformation is not announced even ifthe Talking Caller ID is turned on.Important:R To use this feature, your cellularphone must support Bluetooth in-bandringtone. Refer to your cellularphone’s operating instructions.1 MMENUN2 For CELL 1: #6141For CELL 2: #61423 MbN: Select the desired setting.4 MSAVEN a MOFFNNote:R The units use the preset ringer tones(page 43) instead of your cellularphone’s ringer tone when a cellularcall is being received if:– your cellular phone is in silent mode(depending on your cellular phone).– the base unit is in use.– 2 handsets are sharing a landlinecall.20 For assistance, please visit http://www.panasonic.com/helpLink to Cell