Panasonic KX-TG7622B Operating Instructions Manual

Also see for KX-TG7622, KX-TG7623, KX-TG762: Operating instructions Quick guide Operating instructions

Contents

Panasonic KX-TG7622B Operating Instructions Manual Manual pdf 71 page image

Error messagesDisplay message Cause/solutionBase no powerorNo link. Re-connectbase AC adaptor.orNo link.R The handset has lost communication with thebase unit. Move closer to the base unit and tryagain.R Unplug the base unit’s AC adaptor to reset theunit. Reconnect the adaptor and try again.R The handset’s registration may have beencanceled. Re-register the handset (page 48).R When “No link.” is displayed during apower failure, place a handset on the baseunit to supply power to the base unit.Busy R No cellular phone is registered to the baseunit. Register a cellular phone (page 19).R The called unit is in use.R Other units are in use and the system is busy.Try again later.R The handset you are using is too far from thebase unit. Move closer and try again.Call phone company foryour access #R You have not stored the voice mail accessnumber. Store the number (page 64).Check tel line R The supplied telephone line cord has not beenconnected yet or not connected properly.Check the connections (page 10).R If you do not connect the telephone line cordand use only cellular lines, set the cellular lineonly mode (page 21).Error!! R Recording was too short. Try again.R Someone is using a cellular line or headset.Try again later.R The phonebook copy is incomplete (page 54).The cellular phone is disconnected from thebase unit. Make sure that other Bluetoothdevices are not connected to the cellularphone, and try again.Failed R Although the unit tried to connect to thecellular phone or headset, the connection hasbeen failed.– Someone is using a cellular line or headset.Try again later.– Make sure that the cellular phone orheadset is not connected to other Bluetoothdevices.For assistance, please visit http://www.panasonic.com/help 71Useful Information