Using a Bluetoothwireless headset(optional) for landlinecallsBy registering a Bluetooth headset to thebase unit, you can have a hands-freeconversation wirelessly for landline calls.Important:R 1 headset can be registered to thebase unit. However, only oneBluetooth device (cellular phone orheadset) can be connected to thebase unit at a time.R For best performance, werecommend using a Bluetoothheadset within 1 m (3.3 feet) of thebase unit. A headset cancommunicate with the base unit withina range of approximately 10 m (33feet).Registering a headset to thebase unitImportant:R Make sure that the Bluetooth headsetis not connected to any otherBluetooth device.1 Your headset:Set your headset to registrationmode.R Refer to the headset operatinginstructions.2 Handset:MMENUN#6213 Enter your headset PIN.R Typically, default PIN is “0000”.Refer to the headset operatinginstructions.4 Press MOKN, then wait until a longbeep sounds.5 MOFFNR When the HEADSET indicator onthe base unit lights green, you areready to use the headset.Connecting/disconnecting a headsetIf you cannot connect the headset andbase unit using the headset, you canconnect using the unit.To use your headset with anotherBluetooth device such as a cellularphone, you may need to disconnect itfrom the base unit.Important:R Make sure that the headset is turnedon.Base unit*1*1 KX-TG7641 series: page 3To connect:Press MHEADSETN.To disconnect:Press and hold MHEADSETN until a longbeep sounds.Handset1 To connect/disconnect:MMENUN#622R A long beep sounds.2 MOFFNDeregistering a headsetYou can cancel a registration of theheadset that is stored to the base unit.See “Deregistering Bluetooth devices”,page 23.Operating a Bluetoothwireless headset using alandlineImportant:R Refer to your headset operatinginstructions for headset operations.For assistance, please visit http://www.panasonic.com/help 55Using Bluetooth Devices