Panasonic KX-TG8070HK Operating Instructions Manual

C Making/Answering Calls12Making calls1 Lift the handset and dial the phone number.L To correct a digit, press {DEL}.2 {C}3 When finished talking, press {i} or place thehandset on the base unit.Speakerphone1 During a conversation, press {s} to turn onthe speakerphone.L Speak alternately with the caller.2 When finished talking, press {i}.Note:L For best performance, use the speakerphone ina quiet environment.L To switch back to the receiver, press {C}.L Speakerphone cannot be used when theheadset is connected.Adjusting the receiver or speaker volumePress {^} or {V} while on a call.Making a call using the redial listThe last 10 phone numbers dialled are stored inthe redial list (each 24 digits max.).1 {V/R}2 {^}/{V}: Select the desired number.3 {C}Editing/erasing/storing1 {V/R}2 {^}/{V}: Select the desired number. i{MENU}3 Proceed with the desired operation.■ Editing a number before calling it:{^}/{V}: “Edit and Call” i {OK} iPress {<} or {>} to move the cursor. iEdit the number. i {C}■ Erasing numbers:{^}/{V}: “Erase” or “Erase All” i{OK} i {YES} i {i}■ Storing a number into the handsetphonebook:{^}/{V}: “Add Phonebook” i {OK} iEnter a name (15 characters max.; page22). i {OK} i {i}Note:L When editing:– To erase a number, place the cursor to theright of where you want to erase the number,then press {DEL}.– To insert a number, place the cursor whereyou want to insert the number, then press theappropriate dial key.Pause (for PBX/long distance serviceusers)A pause is sometimes required when making callsusing a PBX or long distance service.Example: If you have to dial {9} before diallingoutside numbers manually, you will probably needto pause after dialling {9} until you hear a dial tone.1 Press {9} to reproduce a dial tone for outsidecalls.2 Press {0} for about 2 seconds to enter apause.3 Dial the phone number. i {C}Note:L A 3 second pause is inserted each time {0} ispressed for about 2 seconds. Repeat as neededto create longer pauses.Useful features during a callMuteWhile mute is turned on, you will be able to hearthe other party, but the other party will not be ableto hear you.To mute your voice, press {</T}.L o is displayed.L To return to the conversation, press {</T}again.