Panasonic KX-TG8100FX Operating Instructions Manual

Preparation10*The pictured model is KX-TG8100.Note:L It is normal for the handset to feel warmduring charging.L If you want to use the unit immediately,charge the batteries for at least 15minutes.L Clean the charge contacts of the handsetand base unit with a soft, dry cloth once amonth, otherwise the batteries may notcharge properly. Clean more often if theunit is exposed to grease, dust or highhumidity.Battery strengthPanasonic Ni-MH battery performance(included batteries)Note:L It is normal for batteries not to reach fullcapacity at the initial charge. Maximumbattery performance is reached after a fewcomplete cycles of charge/discharge(use).L Actual battery performance depends on acombination of how often the handset is inuse and how often it is not in use(standby).L Battery operating time may be shortenedover time depending on usage conditionsand ambient temperature.L Even after the handset is fully charged,the handset can be left on the base unitwithout any ill effect on the batteries.L The battery strength may not be displayedcorrectly after you replace the batteries. Inthis case, place the handset on the baseunit and charge for at least 7 hours.Screen saver modeThe backlight will turn off completelyafter 1 minute of inactivity if the handset isnot on the base unit.To use the handset when it is in screensaver mode, first press {ih} to turn thedisplay on again.Turning the power on/offPower onPress {ih} for about 1 second.Power offPress {ih} for about 2 seconds.Battery icon Battery strength1 High2 Medium3 LowWhen flashing: Needsto be charged.Operation Operating timeIn continuous use 12 hours max.In continuousstandby mode150 hours max.ChargecontactTG8100-8120FX(e).book Page 10 Wednesday, August 9, 2006 3:13 PM