Panasonic KX-TG8100FX Operating Instructions Manual

Useful Information46Static is heard, sound cuts in andout. Interference from otherelectrical units.L Place the handset and the base unit away fromother electrical appliances.L Move closer to the base unit.L If your unit is connected to a telephone line withDSL service, the DSL service may be interferingwith your telephone service. We recommendconnecting a filter to the telephone line between thebase unit and the telephone line jack. Contact yourDSL service provider for more information.Noise is heard during a call. L You are using the handset or base unit in an areawith high electrical interference. Place the handsetand base unit away from interference sources, suchas antennas and mobile phones.The handset/base unit stopsworking while being used.L Disconnect the AC adaptor and turn off thehandset. Connect the AC adaptor, turn on thehandset and try again.Pressing B does not display/dialthe last number dialled.L The redialled number was more than 24 digits long.Redial the number manually.Mute does not turn off after the lineis connected.L Press {C/T}.The handset beeps intermittentlyand/or 3 flashes.L Fully charge the batteries (page 9).I fully charged the batteries, but3 still flashes.L Clean the charge contacts and charge again (page9).L It is time to replace the batteries (page 9).Caller information is not displayed. L You must subscribe to Caller ID service.L Consult your service provider/telephone company.L If your unit is connected to a telephone line withDSL service, the DSL service may be interferingwith your telephone service. We recommendconnecting a filter to the telephone line between thebase unit and the telephone line jack. Contact yourDSL service provider for more information.While viewing caller information,the display returns to standbymode.L Do not pause for over 1 minute while searching.Problem Cause & solutionTG8100-8120FX(e).book Page 46 Wednesday, August 9, 2006 3:13 PM