Panasonic KX-TG8100FX Operating Instructions Manual

C Making/Answering Calls14Other featuresVoice enhancerYou can change the tone quality of thereceiver while you are on a call.1 Press " during a call.L For KX-TG8120 users, select “VoiceEnhancer”, then press #.2 “High Tone” or “Low Tone” i #L d is displayed.MuteWhile mute is turned on, you will be able tohear the other party, but the other party willnot be able to hear you.To mute your voice, press {C/T}.L To return to the conversation, press{C/T} again.Key lockThe handset can be locked so that no callsor settings can be made. Incoming calls canbe answered, but all other functions aredisabled while key lock is on.To turn key lock on, press " (middle softkey) for about 2 seconds.L ! is displayed.L To turn key lock off, press ! (middle softkey) for about 2 seconds.R button (to use the recall feature){R} is used to access optional telephoneservices. Contact your serviceprovider/telephone company for details.Note:L If your unit is connected to a PBX (privatebranch exchange), pressing {R} can allowyou to access certain features of your hostPBX such as transferring an extensioncall. Consult your PBX dealer for details.L You can change the recall time (page 23).Pause button (for PBX/long distanceservice users)A pause is sometimes required whenmaking calls using a PBX or long distanceservice.Example: If you have to dial {0} beforedialling outside numbers manually, you willprobably need to pause after dialling {0}until you hear a dial tone.1 {0} i D2 Dial the phone number. i {C} / {s}Note:L A 3 second pause is inserted each timeD is pressed. Press repeatedly to insertlonger pauses.Temporary tone dialling (for rotary orpulse service users)You can temporarily switch the dialling modeto tone when you need to access touch toneservices (e.g., telephone banking services).1 Make a call.2 Press {*} when prompted to enter yourcode or PIN, then press the appropriatedial keys.Note:L The dialling mode will return to pulsewhen you hang up.Recording a telephone conversation(KX-TG8120 only)Important:L Before recording a conversation, youshould inform the other party that theconversation will be recorded.1 Press " during an outside call.2 “Record Call” i #3 To stop recording, press $.Note:L To listen to the recorded conversation, seepage 32.TG8100-8120FX(e).book Page 14 Wednesday, August 9, 2006 3:13 PM