Getting Started15Initial settingsDisplay language1 1 (middle soft key) y11z2 {r}: Select your desired language.s M3 {ic}Date and time1 1 (middle soft key) y1z12 Enter the current date, month, andyear. s MExample: 15 July, 201115 z7 11L You can select the date format bypressing y:– dd/mm/yy (date/month/year)– yy/mm/dd3 Enter the current hour and minute.Example: 9:30z9 3zL You can select 24-hour or 12-hourclock format (“AM” or “PM”) bypressing /.4 M s {ic}Note:L The date and time may be incorrectafter a power failure. In this case, setthe date and time again.One touch eco modeThe {ECO/R} button on the handsetenables you to activate the eco functionwith one touch.By activating eco mode, your unit canreduce the base unit transmission powerby up to 90% in standby mode.You can turn on/off one touch eco modeby just pressing {ECO/R}. The defaultsetting is “Normal”.– When the one touch eco mode is on:“Low” is temporarily displayed andi is shown on the handset displayinstead of w.– When the one touch eco mode is off:“Normal” is temporarily displayedand i goes off from the handsetdisplay.Note:L When there is another cordless phonenearby and it is in use, the base unittransmission power may not bereduced.L Activating one touch eco modereduces the range of the base unit instandby mode.L If you set the repeater mode to “On”(page 38):– One touch eco mode is cancelled.– “Eco Setup” is not shown in thedisplay menu (page 27).■ Direct command code:Programmable settings can beaccessed by pressing 1 (middlesoft key), y and then thecorresponding code on the dialkeypad (page 24).Example: Press 1 (middle softkey) y1z1.■ Symbol meaning:Example: {r}: “Off”Press {V} or {^} to select the wordsin quotations.TG862xAZ(e).book Page 15 Thursday, May 12, 2011 1:39 PM