Programming24Programmable settingsYou can customise the unit by programming the following features using the handset.To access the features, there are 2 methods.■ Scrolling through the display menus1 1 (middle soft key)2 Press {V}, {^}, {4}, or {3} to select the desired main menu. s M3 Press {V} or {^} to select the desired item from the next sub-menus. s M4 Press {V} or {^} to select the desired setting. s ML This step may vary depending on the feature being programmed.L To exit the operation, press {ic}.■ Using the direct command code1 1 (middle soft key) s Enter the desired code.Example: Press 1 (middle soft key) y1z1.2 Select the desired setting. s ML This step may vary depending on the feature being programmed.L To exit the operation, press {ic}.Note:L In the following table, < > indicates the default settings.L In the following table, + indicates the reference page number.L Display menu order and sub-menu may vary depending on your model.Display the menu tree and direct command code tableMain menu: j “Caller List”Main menu: s “Answer System”Operation Code +Viewing the caller list. #213 42Sub-menu 1 Sub-menu 2 Settings Code +Message List – – #329 44Play New Msg. – – #323 44Play All Msg. – – #324 44Erase All Msg.*1 – – #325 45Greeting Start REC*1(Record greeting)– #302 44Play Greeting – #303 44Default*1(Reset to pre-recorded greeting)– #304 44TG862xAZ(e).book Page 24 Thursday, May 12, 2011 1:39 PM