Panasonic KX-TG9472B Operating Instructions Manual

Also see for KX-TG9471: Quick guide Operating instructions

Making callsUsing the base unit1 Dial the phone number.R To correct a digit, press MCLEARN.2 Lift the corded handset.R An available line is automatically selectedand either the LINE 1 indicator or LINE 2indicator lights up. To change the lineselection mode, see page 14.R You can also select the line manually bypressing MLINE 1N or MLINE 2N before liftingthe corded handset.3 When you finish talking, place the cordedhandset on the cradle.Note:R You can also dial the phone number after liftingthe corded handset.R To switch to the cordless handset, press MLINE1N or MLINE 2N on the cordless handset, thenplace the corded handset on the cradle.Using the speakerphone1 During a conversation with the cordedhandset, press M N to turn on thespeakerphone.R You can place the corded handset on thecradle.R Speak into the base unit microphone.R Speak alternately with the other party.2 When you finish talking, press M N.Note:R For best performance, use the speakerphone ina quiet environment.R To switch to the receiver, lift the corded handset.Using the handset1 Lift the handset and dial the phone number.R To correct a digit, press MCLEARN.2 Press M N.R An available line is automatically selectedand the line number is displayed. Tochange the line selection mode, seepage 14.R You can also select the line manually bypressing MLINE 1N or MLINE 2N.3 When you finish talking, press MOFFN or placethe handset on the charger.Note:R The LINE 1 indicator or LINE 2 indicator on thebase unit lights up while using the handset.Using the speakerphone1 Dial the phone number and press M N.R Speak alternately with the other party.2 When you finish talking, press MOFFN.Note:R For best performance, use the speakerphone ina quiet environment.R To switch back to the receiver, press M N.Adjusting the receiver or speakervolumeBase unit / HandsetPress MDN or MCN repeatedly while talking.Making a call using the redial listBase unit / HandsetThe last 10 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 MREDIALN2 MbN: Select the desired phone number.3 Proceed with the operation for your unit.Base unit: Lift the corded handset.Handset: M NErasing a number in the redial list1 MREDIALN2 MbN: Select the desired phone number. aMERASEN (Soft key)3 MbN: “Yes” a MSELECTN4 Proceed with the operation for your unit.Base unit: MnN (EXIT)Handset: MOFFNPause (for PBX/long distance serviceusers)A pause is sometimes required when making callsusing a PBX or long distance service. Whenstoring a calling card access number and/or PIN inFor assistance, please visit http://www.panasonic.com/help 15Making/Answering Calls