Panasonic KX-TGD320E Operating Instructions Manual

– store a phone number to which the unitmakes the call to.– turn on the new message alert setting.After you answer the new message alert call,you can listen to messages from that call(page 41).Important:R A new message alert is stopped 1 minuteafter the unit starts to call. The unit will notretry the call even if the call is not answered.Storing a phone number to which theunit makes an alert calln From the phonebook:1 MMENUN#3382 MbN: “Notification to” a MOKNa MADDN3 MbN: “Phonebook” a MOKN4 MbN: Select the desired phonebookentry. a MOKN a MOFFNn By entering a phone number:1 MMENUN#3382 MbN: “Notification to” a MOKNa MADDN3 MbN: “Manual” a MOKN4 Enter the desired name (16 charactersmax.). a MOKN5 Enter the desired number (24 digitsmax.). a MOKN 2 times a MOFFNTurning on/off the new message alertsetting1 MMENUN#3382 MbN: “On/Off” a MOKN3 MbN: Select the desired setting. a MOKNa MOFFNEditing the set phone number1 MMENUN#3382 MbN: “Notification to” a MOKN3 MMENUN a MbN: “Edit” a MOKN4 Edit the name if necessary (16 charactersmax.). a MOKN5 Edit the phone number if necessary (24digits max.). a MOKN 2 times a MOFFNErasing the set phone number1 MMENUN#3382 MbN: “Notification to” a MOKN3 MMENUN a MbN: “Erase” a MOKN4 MbN: “Yes” a MOKN a MOFFNR The new message alert setting isturned off.Activating/inactivating the remoteaccess code to play messagesIf you activate this feature, you must enter theremote access code (page 42) to play thenew message from the new message alertcall. This is so that unauthorised partiescannot listen to your messages. The defaultsetting is “Inactivate”.– “Inactivate”: You can listen to themessage by pressing 4 to play newmessages (without entering the remoteaccess code).– “Activate”: You must enter your remoteaccess code and then press 4 to play newmessage.1 MMENUN#3382 MbN: “Remote Code” a MOKN3 MbN: Select the desired setting. a MOKNa MOFFNListening to messagesAfter you answer the new message alert, youcan listen to the messages as follows.n When the remote access code is set to“Inactivate”:Press 4 to play the new message duringthe announcement.n When the remote access code is set to“Activate”:1 Enter the remote access code(page 42) during the announcement.Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 41Answering SystemTGD31x_32xE(en)0202_ver201.pdf 41 2015/02/02 14:00:41