Panasonic KX-TGD590C Operating Instructions Manual

Also see for KX-TG273CSK: Quick guide

Contents

1 For CELL 1: MMENUN#6111For CELL 2: MMENUN#61122 MbN: “Yes” a MSELECTNR When the cellular phone is unpaired,the CELL indicator is turned off.3 MOFFNLink to cell settingsSelecting which unit receivescellular callsYou can select which unit rings and receivescalls for a cellular line. When “All” isselected, all handsets and the base unit ring.1 For CELL 1: MMENUN#6271For CELL 2: MMENUN#62722 MbN: Select the desired handset or “All”.a MSAVEN a MOFFNNote:R When you select a specific handset toreceive calls for a cellular line otherhandsets cannot answer the calls.R When you change to “All” from anothersetting, the base unit ringer volume alsoreturns to the lowest level even if the ringervolume was changed.R The units selected with this setting have thealert feature (page 47) applied to them.Ring as cell modeOnce this feature is turned on, the handsetand base unit ring using the same ringer toneas your cellular phone.The following settings are available:– “Off”: Turn this feature off to use theringer tones of the handset and base unit.Caller information is announced dependingon the Talking Caller ID setting (page 35).– “On (with Talking CID)” (default):The handset and base unit use your cellularphone’s ringer tone. Caller information isannounced even if the Talking Caller ID isturned off.– “On (without Talking CID)”: Thehandset and base unit use your cellularphone’s ringer tone. Caller information isnot announced even if the Talking Caller IDis turned on.Important:R To use this feature, your cellular phonemust support Bluetooth in-band ringtone.Refer to your cellular phone’s operatinginstructions.1 For CELL 1: MMENUN#6141For CELL 2: MMENUN#61422 MbN: Select the desired setting. aMSAVEN a MOFFNNote:R The units use the preset ringer tonesinstead of your cellular phone’s ringer tonewhen a cellular call is being received if:– your cellular phone is in night mode(depending on your cellular phone).– the base unit is in use.– 2 handsets are sharing a landline call.R If your cellular phone is in night mode with“On (with Talking CID)” set, the unitannounces caller information even whenTalking Caller ID is turned off (page 35).To use the handset ringer toneinstead of your cellular phone’sringer toneSelect “Off” in step 2, “Ring as cell mode”,page 17.To change the handset ringer tone for acellular line, see page 33.Auto connection to the Bluetoothdevices (cellular phones)After pairing, your Bluetooth devices areconnected to the base unit. If you move theBluetooth devices out of base unit range, theBluetooth devices are disconnected from thebase unit. This feature allows the base unit totry to reconnect the Bluetooth devices atregular intervals when it returns within baseunit range. You can set the interval. Thedefault setting is “1 min”.For assistance, visit www.panasonic.ca/english/support 17Link to Cell