Panasonic KX-TGD590C Operating Instructions Manual

Also see for KX-TG273CSK: Quick guide

Contents

– Handset: “Alert On/Off” must beturned on (page 47).R If this feature does not work, turn on yourdevice’s Bluetooth feature, unplug the baseunit’s AC adaptor, and then reconnect it.*1 Turning on [Application Alertsmanager]Use the following procedure afterinstalling the Link to Cell app.Android 2.x: Open your device’s[Settings] app. a Tap [Accessibility].a Turn on the [Accessibility] and[Application Alerts manager]checkboxes.Android 4.x: Open your device’s[Settings] app. a Tap [Accessibility].a Turn on [Application Alertsmanager].RequirementsR An Android device (Android 2.1 or later)Text message (SMS) alertFor iPhone and BlackBerry® usersThis feature alerts you on your DECT phonewhen your paired cellular phone receives SMSmessages. The Link to Cell app is not requiredfor iPhone and BlackBerry users.Important:R Your cellular phone must support MessageAccess Profile (MAP) specification.R For further information, refer to theinstructions on web page listed below:www.panasonic.net/pcc/support/tel/sms/R To use this feature, the following settingsare required:– iPhone and BlackBerry Phone:Bluetooth must be turned on.– Handset: “Alert On/Off” must beturned on (page 47).R If this feature does not work, turn on yourdevice’s Bluetooth feature, unplug the baseunit’s AC adaptor, and then reconnect it.Alert settings for yourDECT phoneIf your cellular phone is paired to the base unitand receives notifications, the handset canalert you:– by briefly displaying a message– by announcement– by sounding alert tonesImportant:R For Android users: Use the Link to Cell appto enable the desired alerts (page 46).Turning alert on/offOnce this feature is turned on, it will alert youon the handset when your cellular phonereceives notifications.– “On” (default): The handset alerts you.– “Off”: The handset does not alert you.1 For CELL 1: MMENUN#6101For CELL 2: MMENUN#61022 MbN: Select the desired setting. aMSAVEN a MOFFNSetting the voice alertYou can turn on/off the voice alert.– “On” (default): The handset notifies you byvoice announcement.– “Off”: Voice announcement is notavailable as alert.1 For CELL 1: MMENUN#6031For CELL 2: MMENUN#60322 MbN: Select the desired setting. aMSAVEN a MOFFNSelecting the alert tone1 For CELL 1: MMENUN#6041For CELL 2: MMENUN#60422 MbN: Select the desired setting. aMSAVEN a MOFFNFor assistance, visit www.panasonic.ca/english/support 47Using Bluetooth® Devices