To establish a conference call:MMENUN a MbN: “Conference” aMSELECTNR To leave the conference, press MOFFN.The other 2 parties can continue theconversation.R To put the outside call on hold:MMENUN a MbN: “Hold” aMSELECTNTo resume the conference: MMENUNa MbN: “Conference” a MSELECTNR To cancel the conference: MMENUN aMbN: “Stop conference” aMSELECTNYou can continue the conversationwith the outside caller.IntercomIntercom calls can be made betweenhandsets.Note:R When paging unit(s), the paged unit(s)beeps for 1 minute.R If you receive an outside call while talkingon the intercom, the interrupt tone sounds.To finish intercom, press MOFFN. To answerthe call, press MTALK/ZN.R To change the handset ringer volume andringer tone for intercom, see page 37.Making an intercom call1 MMENUN a MbN: “Intercom” aMSELECTN2 MbN: Select the desired unit or “Voicepaging”a MSELECTNR If you select “Voice paging”, speakinto the microphone after the beep.Your voice will be heard using thespeakers of all handsets, until a pagedparty answers your page or until youpress MOFFN.After the other party answers, thespeakerphone mode is turned on.3 When you finish talking, press MOFFN.Note:R You can also use the MINTERCOMN softkey, if displayed, to make intercom calls.R You cannot use voice paging if other unitsare in use.Answering an intercom call1 Press MTALK/ZN to answer the page.2 When you finish talking, press MOFFN.Turning auto intercom on/offThis feature allows the handset to answerintercom calls automatically when it is called.You do not need to press MTALK/ZN. Whenthis feature is set to “On”, the monitoringhandset for the baby monitor feature(page 43) will also answer baby monitorcalls automatically. The default setting is“Off”.1 MMENUN#2732 MbN: Select the desired setting. aMSAVEN a MOFFNNote:R This feature is not available for all handsetspaging and voice paging even if it is turnedon.For assistance, visit www.panasonic.ca/english/support 23Making/Answering Calls