Panasonic KX-TGD890C Operating Instructions Manual

Also see for KX-TGD890: Operating instructions

4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired month and date. aMOKNn Weekly:MbN: Select the desired day of the weekand press MSELECTN. a MOKN5 Set the desired time.6 *: Select “AM” or “PM”. a MOKN7 Enter a text memo (10 characters max.).a MOKN8 MbN: Select the desired alarm tone. aMSELECTNR We recommend selecting a differentringer tone from the one used foroutside calls.9 MbN: Select the desired snooze setting.a MSAVEN10 MSELECTN a MOFFNNote:R Press MSTOPN to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key or MSNOOZEN to stopthe sound but keep the snooze functionactivated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Night modeNight mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Night mode canbe set for each unit.Using the phonebook’s group feature(page 31), you can also select groups ofcallers whose calls override night mode andring the unit (Caller ID subscribers only).Important:R Make sure the unit’s date and time settingis correct (page 14).R We recommend turning the base unit ringeroff (page 20) in addition to turning the nightmode on.R If you have set the alarm, the alarm soundseven if the night mode is turned on.Turning night mode on/off1 MMENUN#2382 MbN: Select the desired setting. aMSAVENR If you select “Off”, press MOFFN toexit.3 Enter the desired hour and minute youwish to start this feature.4 *: Select “AM” or “PM”. a MOKN5 Enter the desired hour and minute youwish to end this feature.6 *: Select “AM” or “PM”.7 MSAVEN a MOFFNChanging the start and end time1 MMENUN#2372 Continue from step 3, “Turning nightmode on/off”, page 41.Selecting groups to bypass nightmode1 MMENUN#2412 MbN: Select the desired groups. aMSELECTNR “ ” is displayed next to the selectedgroup numbers.R To cancel the selected group:MbN: Select the group. a PressMSELECTN again. “ ” disappears.3 MSAVEN a MOFFNFor assistance, visit www.panasonic.ca/english/support 41Programming