Value Range 0–5000 (0: Infinite time)Note• The unit will play the tone for the duration of the first value, stopit for the duration of the second value, play it for the duration ofthe third value, and then stop it for the duration of the last value.The whole sequence will then repeat. For example, if the valuefor this setting is "100,100,0,0", the unit will play the tone for 100ms, stop it for 100 ms, and then play it continuously.Default Value 0,0,0,0 (The unit plays the dial tone continuously.)Configuration File Reference DIAL_TONE_TIMING (Page 168)3.7.4.2 Busy ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of busy tones using 2whole numbers separated by a comma.Value Range 0, 200–1000 (0: No tone)Default Value 480,620Configuration File Reference BUSY_TONE_FRQ (Page 169)Tone TimingsDescription Specifies the pattern, in milliseconds, of busy tones using 4 wholenumbers (on 1, off 1, on 2, off 2) separated by commas.Value Range 0–5000 (0: Infinite time)Default Value 500,500,500,500Configuration File Reference BUSY_TONE_TIMING (Page 169)3.7.4.3 Ringing ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of ringback tones using 2whole numbers separated by a comma.Value Range 0, 200–1000 (0: No tone)Default Value 440,480Configuration File Reference RINGING_TONE_FRQ (Page 169)116 Administrator Guide Document Version 2011-013.7.4 Tone Settings
