Menu Item Section Title SettingAccessLevel*1Ref.U AProvisioningMaintenanceProvisioningMaintenanceEnable Provisioning*2 ü Page 123Standard File URL*2 ü Page 124Product File URL*2 ü Page 124Master File URL*2 ü Page 124Cyclic Auto Resync*2 ü Page 125Resync Interval*2 ü Page 125Header Value for ResyncEvent*2ü Page 125Reset to Defaults – – ü Page 125Restart – – ü Page 126*1 The access levels are abbreviated as follows:U: User; A: AdministratorA check mark indicates that the setting is available for that access level.*2 This setting can also be configured through configuration file programming.3.2 Programming Instructions3.2.1 Before Accessing the Web User InterfaceRecommended EnvironmentThis unit supports the following specifications:HTTP Version HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)Authentication Method Digest (or Basic)The Web user interface will operate correctly in the following environments:Operating System Microsoft® Windows® XP or Windows Vista® operating systemWeb Browser Internet Explorer® 6.0 (Windows XP only), Internet Explorer 7.0, orInternet Explorer 8.0 internet browserLanguage (recommended) EnglishOpening/Closing the Web PortTo access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to theUser Guide on the Panasonic Web site (® see Introduction).50 Administrator Guide Document Version 2011-013.2.1 Before Accessing the Web User Interface
