Value Range 3–50 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be greater than [Initial Delay]– This value must be greater than [Minimum Delay]– [Initial Delay] must be greater than or equal to [MinimumDelay]Default Value 20 (´ 10 ms)Configuration File Reference MAX_DELAY_[1–8] (Page 177)Minimum DelayDescription Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.Value Range 1 or 2 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be less than or equal to [Initial Delay]– This value must be less than [Maximum Delay]– [Maximum Delay] must be greater than [Initial Delay]Default Value 2 (´ 10 ms)Configuration File Reference MIN_DELAY_[1–8] (Page 177)Initial DelayDescription Specifies the initial delay, in 10-millisecond units, of the jitter buffer.Value Range 1–7 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be greater than or equal to [MinimumDelay]– This value must be less than [Maximum Delay]Default Value 2 (´ 10 ms)Configuration File Reference NOM_DELAY_[1–8] (Page 178)3.6.4.4 DTMFDTMF TypeDescription Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)tones.Document Version 2011-01 Administrator Guide 973.6.4 VoIP Settings [Line 1]–[Line 8]
