Value Range 00:00–23:59Note• If the value for this setting is any valid value other than an emptystring, the unit downloads the configuration files at the fixedtime, and the settings specified in "CFG_CYCLIC","CFG_CYCLIC_INTVL", and "CFG_RTRY_INTVL" aredisabled.• If the value for this setting is an empty string, downloading theconfiguration files at the fixed time are disabled.Default Value Empty stringCFG_RESYNC_FROM_SIPValue Format StringDescription Specifies the value of the "Event" header sent from the SIP server tothe unit so that the unit can access the configuration files on theprovisioning server.Value Range Max. 15 charactersNote• If the value for this setting is any value other than an emptystring (typically "check-sync" or "resync" is set), the unit willaccess the configuration files on the provisioning server whenthe SIP server sends an event to notify the unit.• If the value for this setting is an empty string, the unit will notaccess the configuration files on the provisioning server even ifthe unit receives a synchronization notification of an event.Default Value check-syncWeb User Interface Reference Header Value for Resync Event (Page 125)4.4 Network Settings4.4.1 IP SettingsCONNECTION_TYPEValue Format IntegerDescription Specifies whether to assign the IP address automatically (DHCP) ormanually (static).Note• This setting is available only when "NW_SETTING_ENABLE" isset to "N".152 Administrator Guide Document Version 2010-084.4.1 IP Settings
