SHARED_USER_ID_[1–8]Parameter Name Example SHARED_USER_ID_1, SHARED_USER_ID_2, …,SHARED_USER_ID_8Value Format StringDescription Specifies the unique ID used by the SIP server when"SHARED_CALL_ENABLE_[1–8]" is set to "Y".Value Range Max. 24 charactersDefault Value Empty stringWeb User Interface Reference Unique ID of Shared Call (Page 109)SYNCHRONIZATION_ENABLE_[1–8]Parameter Name Example SYNCHRONIZATION_ENABLE_1, SYNCHRONIZATION_ENABLE_2,…, SYNCHRONIZATION_ENABLE_8Value Format BooleanDescription Specifies whether to synchronize the Do Not Disturb and Call Forwardsettings, configured via the Web user interface or phone user interface,between the unit and the portal server that is provided by your phonesystem dealer.Note• Even if you specify "Y", this feature may not function properly ifyour phone system does not support it. Before you configurethis setting, consult your phone system dealer.• You cannot set both "SHARED_CALL_ENABLE_[1–8]" and"SYNCHRONIZATION_ENABLE_[1–8]" to "Y" at the sametime.Value Range • Y (Enable Do Not Disturb/Call Forward synchronization)• N (Disable Do Not Disturb/Call Forward synchronization)Default Value NWeb User Interface Reference Synchronize Do Not Disturb and Call Forward (Page 109)PRIVACY_MODE_[1–8]Parameter Name Example PRIVACY_MODE_1, PRIVACY_MODE_2, …, PRIVACY_MODE_8Value Format BooleanDescription Specifies whether to enable privacy mode, which prohibits anotherhandset or base unit from barging in on a conversation.Document Version 2010-08 Administrator Guide 1794.7.1 Call Control Settings
