3.5.3 Change User PasswordThis screen allows you to change the password used to authenticate the User account when logging in to theWeb user interface.Note• For security reasons, the characters entered for the password are masked by special characters, whichdiffer depending on the Web browser.• After you change the user password, the next time you access the Web user interface, theauthentication dialog box appears. 2 consecutive login failures will result in an error ("401Unauthorized"). This restriction only applies the first time you attempt to log in after changing thepassword. In all other circumstances, an error occurs after 3 unsuccessful login attempts.3.5.3.1 Change User PasswordNew PasswordDescription Specifies the password to use to authenticate the User account whenlogging in to the Web user interface.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Default Value Not stored.Note• When a user logs in to the Web user interface for the first time,after clicking OK on the authentication dialog box, the [ChangeUser Password] screen is displayed automatically to make theuser set a password.Configuration File Reference USER_PASS (Page 137)Confirm New PasswordDescription Specifies the same password that you entered in [New Password] forconfirmation.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Note• This value must be the same as the value entered in [NewPassword].Document Version 2010-08 Administrator Guide 773.5.3 Change User Password
