Note• Make sure that the import source or target unit (base unit or handset) is in standby mode.• The import source or target unit (base unit or handset) must be specified at the time of import/export.The imported data is added to the existing phonebook data.– If the existing phonebook data has an entry with the same name as the imported entry but thephone number is different, the imported entry is added as a new entry.– If the existing phonebook data has an entry with the same name and phone number as an importedentry, the entry is not added.• The phonebook for a unit has the following limitations:– A maximum of 100 phonebook entries can be stored in the base unit (KX-TGP550 only) and eachof the handsets. If the base unit or handset already has phonebook data, it accepts up to the 100thentry, including the existing entries. The rest of the entries will not be imported, and the message"Memory Full" is displayed on the unit.– The name can contain up to 16 characters.– The phone number can contain up to 32 digits.– Phonebook entries exceeding the characters or digits limits cannot be imported properly.• If the export is interrupted by an operation on the base unit (KX-TGP550 only) or handset, only thedata that has been successfully exported before the interruption is exported to a file.5.2.2 Editing with Microsoft ExcelYou can edit exported phonebook data on a PC with software such as Microsoft Excel. You can then importthe phonebook data into units.To open the phonebook data on a PC1. Open Microsoft Excel.2. Click Office Button, and then Open.Note• Make sure to open a TSV file in this procedure. If you change the extension of a TSV file to".csv", the file will open by simply double-clicking it. However, the character encoding of the filemight not be recognized properly, resulting in garbled characters, or the phone numbers might berecognized as numbers, resulting in data alteration.3. Select All Files for the file type, select the exported phonebook data file, and click Open.Document Version 2010-08 Administrator Guide 2075.2.2 Editing with Microsoft Excel
