Panasonic KX-TS620EX Operating Instructions Manual

Contents

14SettingsDialling ModeThe dialling mode is fixed to “Tone”.Make sure that the handset is on thecradle, the AC adaptor is connectedand the Speakerphone/headset {s/W}indicator light is off.1 Press .2 Scroll to “Program ?” bypressing {4} or {3} and press{OK} (Yes key).3 Scroll to “Set dial mode ?”by pressing {4} or {3}.4 Press {OK} (Yes key).• KX-TS620EXW or KX-TS620EXBis not designed to be used withrotary (pulse dialling) services.5 Press {OK} (Save key).• A long beep sounds.• The display will return to step 3. Toexit the programming mode, pressor wait for 60 seconds.• You can exit the programming mode anytime by pressing .LCD ContrastYou can select the LCD contrast levelfrom 1 to 4 by programming. To makethe display clearer, set to high level.Your phone default setting is 2.Make sure that the handset is on thecradle, the AC adaptor is connectedand the Speakerphone/headset {s/W}indicator light is off.1 Press .2 Scroll to “Program ?” bypressing {4} or {3} and press{OK} (Yes key).3 Scroll to “LCD contrast ?” bypressing {4} or {3} and press{OK} (Yes key).• The current setting is displayed.4 Select the desired contrast bypressing {4} or {3}, then press{OK} (Save key).• A long beep sounds.• The display will return to step 3. Toexit the programming mode, pressor wait for 60 seconds.• You can exit the programming mode anytime by pressing .{ ? }Dial mode:Tone [OK]=Save{ ? }{ ? }{ ? }Low High [OK]=SaveLCD contrast{ ? }{ ? }