Caller ID Service28Storing Caller ListInformation in thePhonebookYou can store numbers that are in theCaller List in the Phonebook.Make sure that the handset is on thecradle, the AC adaptor is connectedand the Speakerphone/headset {s/W}indicator light is off.1 Press {4} or {3} to enter theCaller List.2 Scroll to the caller you want tostore in the Phonebook bypressing {4} or {3}.3 Press .• If the number requires editing, seepage 27.4 Press {OK} (Next key).a) If a name is not required,press {OK} (Next key).b) If a name is required, enter thename (p. 32). When finished,press {OK} (Next key).5 Press {OK} (Save key).• A long beep sounds.• The display will return to Caller List.You can continue storing otheritems. To exit the Caller List, pressor wait for 60 seconds.• If the display shows “Phonebookfull” in step 5, press to exit the list.To erase other stored items from thePhonebook, see page 35.• To cancel during programming, press. Start again from step 1.• You cannot store caller information in thePhonebook if a phone number is notdisplayed. { ? } [OK]=Next123456789 [OK]= NextEnter name [OK]=NextEnter nameJACK SMITH [OK]=Save>Save phonebookSave M1,M2,M3To store an emergency number (#):Emergency numbers are numbers storedin the Phonebook that can be dialled evenwhen the Dial Lock (p. 42) or CallRestriction (p. 43) is set to ON.To store a number as an emergencynumber, add # at the beginning of thename in step 4.JACK SMITH123456789{ ? }{ ? }{ ? }