Description Specifies whether to receive DNS server addresses automatically or toassign a DNS server addresses (up to 2) manually.Note• This setting is available only when "CONNECTION_TYPE" is setto "1" and when "NW_SETTING_ENABLE" is set to "N".Value Range • Y (Use "USER_DNS1_ADDR" or, "USER_DNS1_ADDR" and"USER_DNS2_ADDR")• N (Receive DNS server address automatically)Default Value NPhone User InterfaceReferenceConfiguring Settings from the Unit (Page 17)Web User Interface Reference Domain Name Server (Page 72)STATIC_IP_ADDRESSValue Format StringDescription Specifies the IP address for the unit.Note• This setting is available only when "CONNECTION_TYPE" is setto "0" and when "NW_SETTING_ENABLE" is set to "N".• When you specify this parameter, you must specify"STATIC_SUBNET" together in a configuration file.Value Range IP address in dotted-decimal notationDefault Value Empty stringPhone User InterfaceReferenceConfiguring Settings from the Unit (Page 17)Web User Interface Reference Static IP Address (Page 72)STATIC_SUBNETValue Format StringDescription Specifies the subnet mask for the unit.Note• This setting is available only when "CONNECTION_TYPE" is setto "0" and when "NW_SETTING_ENABLE" is set to "N".• When you specify this parameter, you must specify"STATIC_IP_ADDRESS" together in a configuration file.Value Range IP address in dotted-decimal notationDefault Value Empty stringDocument Version 2011-06 Administrator Guide 1695.4.1 IP Settings
