DIAL_PLAN_NOT_MATCH_ENABLE_nParameter Name Example DIAL_PLAN_NOT_MATCH_ENABLE_1,DIAL_PLAN_NOT_MATCH_ENABLE_2, …,DIAL_PLAN_NOT_MATCH_ENABLE_4Value Format BooleanDescription Specifies whether to enable dial plan filtering so that a call is not madewhen the dialed number does not match any of the dial formatsspecified in "DIAL_PLAN_n".Value Range • Y (Enable dial plan filtering)• N (Disable dial plan filtering)Note• If set to "Y", the dialed number will not be sent to the line whenthe number dialed by the user does not match any of the dialformats specified in the dial plan.• If set to "N", the dialed number will be sent to the line, even ifthe number dialed by the user does not match any of the dialformats specified in the dial plan.Default Value NWeb User Interface Reference Call Even If Dial Plan Does Not Match (Page 115)SHARED_CALL_ENABLE_nParameter Name Example SHARED_CALL_ENABLE_1, SHARED_CALL_ENABLE_2, …,SHARED_CALL_ENABLE_4Value Format BooleanDescription Specifies whether to enable the Shared Call feature of the SIP server,which is used to share one line among the units.Note• You cannot set both "SHARED_CALL_ENABLE_n" and"FWD_DND_SYNCHRO_ENABLE_n" to "Y" at the same time.• Availability depends on your phone system.Value Range • Y (Enable shared call)• N (Disable shared call)Note• If set to "Y", the SIP server will control the line by using ashared-call signaling method.• If set to "N", the SIP server will control the line by using astandard signaling method.Default Value NWeb User Interface Reference Enable Shared Call (Page 114)Document Version 2011-06 Administrator Guide 2095.7.1 Call Control Settings
