Note• For security reasons, the characters entered for the password are masked by special characters, whichdiffer depending on the Web browser.• After you change the administrator password, the next time you access the Web user interface, theauthentication dialog box appears. Two consecutive login failures will result in an error ("401Unauthorized"). This restriction only applies the first time you attempt to log in after changing thepassword. In all other circumstances, an error occurs after 3 unsuccessful login attempts.4.4.2.1 Change Administrator PasswordCurrent PasswordDescription Specifies the current password to use to authenticate the Administratoraccount when logging in to the Web user interface.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Default Value adminpassConfiguration File Reference ADMIN_PASS (Page 149)New PasswordDescription Specifies the new password to use to authenticate the Administratoraccount when logging in to the Web user interface.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Default Value Not stored.Configuration File Reference ADMIN_PASS (Page 149)Confirm New PasswordDescription Specifies the same password that you entered in [New Password] forconfirmation.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Note• This value must be the same as the value entered in [NewPassword].Document Version 2011-06 Administrator Guide 834.4.2 Administrator Password
