3. [ ]/[ ]: Select "Yes" ® [ENTER]4. [ ]/[ ]: Select "Yes" ® [ENTER]Notice• After performing IP Reset, the unit will restart automatically. To avoid problems, it is recommended thatyou save your settings before performing IP Reset.1.2.1.3 Resetting the Settings Made through the Web User Interface(Reset Web Settings)Performing Reset Web Settings from the Web user interface (® see 4.7.5 Reset to Defaults) resets thesettings made through the Web user interface to their default values.When you use this feature, the unit will return to the status just after performing the most recent provisioningor pre-provisioning.Notice• After performing Reset Web Settings, the unit will restart automatically. To avoid problems, it isrecommended that you save your settings before performing Reset Web Settings.Note• The settings configured through the phone user interface only will not be reset. However, settings thatcan be configured through both the phone user interface and Web user interface will be reset.1.2.2 Firmware UpdateYou can update the unit’s firmware to improve the unit’s operation. You can configure the unit so that itautomatically downloads the new firmware file from a specified location. The firmware update will be executedwhen the unit is restarted.For details, see Section 7 Firmware Update.ConfigurationfileProvisioning server Firmware serverA CBFirmwareA DownloadB Check for updateC Firmware download and update30 Administrator Guide Document Version 2011-061.2.2 Firmware Update
