Panasonic KX-UTG200 Administrator's Manual

Also see for KX-UTG200: Brochure & specs Getting started Administrator's guide Setup guide Operating instructions

Contents

Panasonic KX-UTG200 Administrator's Manual Manual pdf 124 page image

Value Range • Yes• NoNote• If you select [Yes], the "c=0.0.0.0" syntax will be set in SDPwhen sending a re-INVITE message to hold the call. If youselect [No], the "c=x.x.x.x" syntax will be set in SDP.Default Value YesConfiguration File Reference RFC2543_HOLD_ENABLE (Page 288)4.5.3.7 CODEC PreferencesG722 (Enable)Description Selects whether to enable the G.722 codec for voice data transmission.Value Range • Yes• NoDefault Value YesConfiguration File Reference CODEC_ENABLE_G722 (Page 282)G722 (Priority)Description Specifies the numerical order usage priority for the G.722 codec.Value Range 1–255Default Value 1Configuration File Reference CODEC_PRIORITY_G722 (Page 283)PCMA (Enable)Description Selects whether to enable the PCMA codec for voice data transmission.Value Range • Yes• NoDefault Value YesConfiguration File Reference CODEC_ENABLE_PCMA (Page 282)PCMA (Priority)Description Specifies the numerical order usage priority for the PCMA codec.Value Range 1–255124 Administrator Guide Document Version 2014-054.5.3 VoIP Settings [Line 1]–[Line n]