1.1.5 Web User Interface ProgrammingAfter connecting the unit to your network, you can configure the unit’s settings by accessing the Web userinterface from a PC connected to the same network. For details, see Section 4 Web User InterfaceProgramming.RouterSwitchingHubSIP PhonePC1.1.5.1 Password for Web User Interface ProgrammingTo program the unit via the Web user interface, a login account is required. There are 2 types of accounts, andeach has different access privileges.• User: User accounts are for use by end users. Users can change the settings that are specific to the unit.• Administrator: Administrator accounts are for use by administrators to manage the system configuration.Administrators can change all the settings, including the network settings, in addition to the settings thatcan be changed from a User account.A separate password is assigned to each account.For details, see Access Levels (IDs and Passwords) in 1.1.5.2 Before Accessing the Web UserInterface.Notice• You should manage the passwords carefully, and change them regularly.• The settings that can be accessed may be limited by the configuration file programming.1.1.5.2 Before Accessing the Web User InterfaceRecommended EnvironmentThis unit supports the following specifications:HTTP Version HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)Authentication Method Digest (or Basic)Document Version 2014-05 Administrator Guide 271.1.5 Web User Interface Programming
