Panasonic KX-UTG200 Administrator's Manual

Also see for KX-UTG200: Brochure & specs Getting started Administrator's guide Setup guide Operating instructions

Contents

Panasonic KX-UTG200 Administrator's Manual Manual pdf 92 page image

PC VLAN IDDescription Specifies the VLAN ID for the PC.Note• You cannot set this parameter if [Enable IEEE802.1X] is set to[Yes].Value Range NULL, 0–4094Default Value 1Configuration File Reference PC_VLAN_ID (Page 254)4.3.5 IEEE802.1X SettingsThis screen allows you to configure settings relating to the IEEE 802.1X networking protocol.4.3.5.1 IEEE802.1X SettingsEnable IEEE802.1XDescription Selects whether to use the IEEE 802.1X protocol.Note• You should specify "Yes" for only one of "LLDP", "VLAN" or"IEEE802.1X".• If "Yes" is specified for two or more of the parameters above,the settings are prioritized as follows: "IEEE802.1X" >"VLAN" > "LLDP". Therefore, if "Yes" is specified for both"VLAN" and "LLDP", the VLAN-related settings are used.Value Range • Yes• NoDefault Value NoConfiguration File Reference IEEE8021X_ENABLE (Page 247)92 Administrator Guide Document Version 2014-054.3.5 IEEE802.1X Settings