Default LineDescription Specifies the line used to make an outgoing call when no line isspecified in the dialing operation.Note• The available line number may vary depending on the type ofthe unit being used.Value Range 1–4 (for KX-UTG200)1–6 (for KX-UTG300)Default Value 1Configuration File Reference DEFAULT_LINE (Page 259)4.6.1.2 Call Rejection Phone Numbers1–30Description Specifies the phone numbers to reject incoming calls from. A maximumof 30 phone numbers can be specified.Note• You can also configure this setting through the phone userinterface. If these settings are changed through the phone userinterface while being changed through the Web user interface,the settings made through the phone user interface will beoverwritten by the settings made through the Web userinterface.Value Range Max. 32 charactersNote• Even if you specify nonconsecutive fields (e.g., fields 1, 5, and30), they will be rearranged into consecutive fields after yousave the settings (i.e., 1, 2, and 3).• If the phone number contains characters other than 0–9, *, #,and +, the number may not be rejected correctly.Default Value Not stored.4.6.2 Call Control [Line 1]–[Line n]This screen allows you to configure various call features that are specific to each line. The number of linesavailable varies depending on the phone being used, as follows:• KX-UTG200: 1–4Document Version 2014-05 Administrator Guide 1294.6.2 Call Control [Line 1]–[Line n]
