Note• During the multicast, if the connection bandwidth drops, the sending bandwidth will drop as well,lowering the resolution and/or the frame rate.• The quality of the multicast video and audio is affected by packet round trip time (RTT), the packet lossratio, and the number of packets re-sent. Terminals store approximately 1 second of data for resending,but if sending/receiving is delayed beyond this, the image may become corrupted. For details onnetwork design that takes into account issues such as round trip time and the packet loss ratio, contactyour dealer.Setting the SystemSetting Multicast1. In step 3 of "Changing System Settings/Performing System Maintenance (Page 103)", select "MulticastSetting" and press [ENTER].• The multicast setting screen is displayed.2. Press [ENTER] and use [ ][ ] to select the microphone of the multicast terminal to use for the multicastfeature.– "MIC·Audio In" (default): Audio is input from both the Boundary Microphone and the RCA inputs.– "Audio In": Audio is input from the RCA inputs.Note• "Multicast Setting" is displayed when "Multicast" in "Enhancement" is enabled.Making Administrator Menu SettingsRegistering the Multicast TreeSets the terminals and multicast conditions registered for the multicast tree. Up to 10 multicast trees can beregistered.New Registration1. In step 7 of "Administrator Menu List (Page 121)", select "Multicast Tree Set." and press [ENTER].• The multicast tree screen is displayed.2. Use [ ][ ] to select ""Not Registered"".Document Version 2015-12 User Manual 153Using Multicast
