Calling by Entering an Address DirectlyWhen using IP mode, you can make a video conference call by entering the IP address (or host name), SIPURI (or SIP user name), H.323 extension, H.323 name, or MCU’s conference room number@IP address.When using NAT Traversal mode, you can make a call by entering the connection number.1 Press [MENU].• The Menu screen is displayed.19 102-5,7-862 Select "Manual Dial" using [ ][ ] and press[ENTER].• The manual dial screen is displayed.Note• You can display the manual dial screen bypressing [START] in the Home screen insteadof performing steps 1 and 2.3 Use [ ][ ] to select the connection mode you want toinput ("Connection mode 1" to "Connection mode9") and press [ENTER].4 Use [ ][ ] to select the connection mode ("IP Mode(SIP)", "IP Mode (H.323)", "NAT Traversal Mode").5 Use [ ][ ] to select the site ("Site 1" to "Site 9").6 When using IP mode, enter the IP address (or hostname), SIP URI (or SIP user name), H.323 extension,H.323 name, or MCU’s conference room number@IPaddress. When using NAT Traversal mode, enter theconnection number (7 digits).Note• When starting multiple-party video conferencecalls, repeat steps 3-6.• When calling more than 4 parties, press [R] todisplay the next page.7 Use [ ][ ] to select "Outgoing Bandwidth / Site"and press [ENTER] on the first page.8 Use [ ][ ] to select the outgoing bandwidth/site to beused ("Not Specified", "256 kbps"–"18 Mbps"). (Thedefault maximum selectable value: "9.0 Mbps")52 User Manual Document Version 2015-12Starting a Video Conference
