Screen DisplayHome Screen (Idle Screen)Displayed when the power is turned on. Also displayed when the [HOME] button is pressed on the remotecontrol.ABDFECMain Video Camera ImageDisplays the video from the main video camera.Unit InformationThe information displayed differs depending on the selected connection mode (Page 127).IP Mode: The connection mode, local site name, the SIP user name (if using a SIP server)/H.323 extension,H.323 name (if using a gatekeeper), LAN1 IP address, LAN2 IP address (KX-VC1600 only), maximumbandwidth, encryption status indication icons, and Static NAT status indication icons (if using the StaticNAT feature).NAT Traversal Mode: The connection mode, local site name, Terminal ID, maximum bandwidth, andencryption status indication icons.IP/NAT Traversal Mode: The connection mode, local site name, Terminal ID, LAN1 IP address, LAN2 IPaddress (KX-VC1600 only), maximum bandwidth, encryption status indication icons, and Static NAT statusindication icons (if using the Static NAT feature).Note• When selecting a local site (Page 101), the selected local site’s information is displayed. The localsite’s set device name is displayed. The information displayed differs depending on the local site’sconnection mode.• If the local site name, SIP user name, H.323 extension, or H.323 name is too long to display, it willbe shortened and ended with "...".Encryption Status Indication IconsThe status of the encryption settings for SIP/H.323/NAT Traversal is indicated by icons. The icon changesas follows:38 User Manual Document Version 2015-12Preparation
