Recording pictures (basic)42VQT0R26Taking Pictures using Auto BracketIn this mode, 3 pictures are automaticallyrecorded by each press of the shutterbutton according to the compensationrange of the exposure.You can select the desired exposureamong the 3 types of pictures.1 Press 3 several times until[ AUTO BRACKET] appearsand then set the compensationrange of the exposure.• You can select the exposure fromj1 EV to i1 EV in steps of 1/3 EV.• When you do not use auto bracket,select [OFF].• When setting the auto bracket, the autobracket icon appears on the lower left ofthe screen.• If the remaining number of recordablepictures is 2 or less, you cannot takepictures by setting auto bracket.• When taking pictures using auto bracketafter the exposure compensation, thepictures are based on the compensatedexposure.When the exposure is compensated, thecompensated exposure value appears onthe lower left of the screen.• When the flash is activated, you can takeonly 1 picture.• When the auto bracket is activated,[AUDIO REC.] cannot be used.• When setting auto bracket and the burstmode simultaneously, auto bracket will beperformed.• The exposure may not be compensatedwith auto bracket depending on thebrightness of the subject.• Auto bracket is canceled after switchingthe camera off.• When setting the auto bracket, the autoreview function is activated regardless ofthe setting on the auto review function.(The picture is not enlarged.) Moreover,the settings for the auto review function onthe [SETUP] menu are disabled.• When the ISO sensitivity is set to[ISO400], the recording interval maybecome longer due to the process toreduce picture noises.AUTO BRACKETSELECT EXIT
