Connecting to a PC or Printer86VQT0R26Connecting to a PCYou can load pictures recorded with thecamera to a PC by connecting the cameraand PC.The software [LUMIX Simple Viewer](for Windows ® ) in the CD-ROM (supplied)allows you to load pictures recorded withthe camera to a PC, print, or send them bye-mail easily.If you use Windows 98/98SE, install theUSB driver and then connect it to thecomputer.For details of [LUMIX Simple Viewer] andinstallation, refer to the separate operatinginstructions for PC connection.A: USB connection cable (supplied)B: AC adaptor (DMW-AC5; optional)• For using the AC adaptor (DMW-AC5;optional), turn the camera off before theconnection.1 Turn the camera on and then set[USB MODE] on the [SETUP]menu to [PC]. (P85)• If you set [USB MODE] to [PictBridge(PTP)] and then connect the camera tothe PC, messages may appear on thescreen of the PC.Select [Cancel] to close the indicationsand disconnect the camera from thePC. Connect the camera after you set[USB MODE] again.2 Connect the camera to a PC viathe USB connection cable A(supplied).• Connect the USB connection cable withthe [ ] mark facing the [2] mark onthe [DIGITAL] socket.• Hold the plug C to push into or pull out.D: This message appears during datatransfer.[Windows]The drive appears on the [My Computer]folder.• If it is the first time you are connecting thecamera to a PC, the required driver isinstalled automatically so that the cameracan be recognized by the Windows Plugand Play, then it appears on the[My Computer] folder.[Macintosh]The drive is displayed on the screen as[NO_NAME] or [Untitled].AV OUTDIGITALDC INACCESS
