Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Also see for Lumix DMC-TZ10: Operating instructions Operating instructions Basic operating instructions Basic operating instructions

Contents

26 VQT2R48 VQT2R48 27For details about the setting procedure in the [SETUP] menu (→20)Using the [SETUP] menu (Continued)[RESET]Reset to the defaultsettings.[RESET REC. SETTINGS?][YES]/[NO][RESET SETUP PARAMETERS?][YES]/[NO]• Information registered in [FACE RECOG.] is reset ifrecording settings are reset.• Resetting the setup parameters will also reset thefollowing.Age in years/months and names in [BABY] and [PET]Scene Modes, any settings in the [TRAVEL MODE]menu (including GPS function) , [FAVORITE] inthe [PLAYBACK] menu (set to [OFF]), [ROTATE DISP.](set to [ON])• Folder numbers and Clock settings will not be reset.• Camera movement may be audible as the lens functionis reset. This is not a fault.[USB MODE]Select communicationmethod for whenconnecting camera to acomputer or printer withUSB connection cable.[SELECT ON CONNECTION]:Select [PC] or [PictBridge (PTP)] each time you connect toa computer or PictBridge-compatible printer.[PictBridge (PTP)]: Select when connecting to aPictBridge-compatible printer.[PC]: Select when connecting to a computer.[VIDEO OUT]Change the video outputformat when connectedto a TV, etc. (PlaybackMode only).[NTSC]/[PAL]If the default setting is changed, AVCHD Lite motionpictures may not be played correctly.• Operates when AV cable is connected.[TV ASPECT]Change the aspect ratiowhen connected to aTV, etc. (Playback Modeonly)./• Operates when AV cable is connected.Item Settings, notesFor details about the setting procedure in the [SETUP] menu (→20)[HDMI MODE]Set the output resolutionwhen connected to ahigh-definition TV withan HDMI mini cable(optional). (→148)[AUTO]:The output resolution is automatically determinedbased on information from the connected TV.[1080i]: Outputs 1080 effective scanning lines in interlacedformat.[720p]: Outputs 720 effective scanning lines inprogressive format.[576p]∗1 /[480p]∗2 : Outputs 576 (or 480) effective scanninglines in progressive format.Interlaced and Progressive FormatsIn ‘i’ = interlaced format (interlaced scanning), half ofthe effective scanning lines are displayed alternatelyevery 1/50∗1 (1/60∗2) second. In ‘p’ = progressive format(progressive scanning), high-density video signals are sentsimultaneously for all effective scanning lines every 1/50∗1(1/60∗2) second.The HDMI socket of this camera supports [1080i] highdefinition video output.To enjoy progressive video or high definition video, a TVcompatible with these formats is required.∗1 When the video out isset to [PAL]∗2 When the video out isset to [NTSC]• Even if [1080i] is set, the motion picture is output at 720pduring playback.• If no video appears on the TV even though [AUTO] isset, try switching to [1080i], [720p], or [576p]∗1 ([480p]∗2)to adjust to a video format that can be displayed on yourTV. (See the manual for your TV.)• This is activated when an HDMI mini cable (optional) isconnected.• For further details (→148)[VIERA Link]Enable automatic linkingwith other VIERA Link-compatible devices, andoperability with a VIERAremote control whenconnecting via an HDMImini cable (optional)(→149).[OFF]: Operations must be performed via the camera’sown buttons.[ON]: Operations may be performed via the remotecontrol of the VIERA Link-compatible device.(Not all operations will be available.) Operability ofthe camera’s own buttons will be limited.• Works when connected via an HDMI mini cable(optional).Item Settings, notesThe [HDMI MODE], [VIERA Link] menu items are not available in the DMC-TZ8/DMC-ZS5.