Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Also see for Lumix DMC-TZ10: Operating instructions Operating instructions Basic operating instructions Basic operating instructions

Contents

48 VQT2R48 VQT2R48 49Taking pictures with flash (Continued)Recording Mode:Taking close-up picturesRecording Mode:■Available types in each mode (○: Available, –: Not available, : Default setting)○∗ ○ ○ ○ ○ ○ – ○ – – – – – ○– ○ ○ – ○ – – – – – – – – ○– ○ ○ ○ ○ ○ – ○ – – ○ ○ – ○– – – – – – – – ○ ○ – – – –– ○ – – – – ○ – ○ ○ – – ○ –○ ○ ○ ○ ○ ○ ○ ○ ○ ○ – ○ ○ ○∗ Set to (Auto), (Auto/Red-Eye Reduction), (Slow Sync./Red-Eye Reduction) or(Slow Sync.) depending on the subject and brightness.• The flash cannot be used when recording motion pictures, Scene Modes , , ,, , , or .■Focus range according to ISO Sensitivity and zoomFocus rangeMax. W Max. T[SENSITIVITY](→97)AUTO Approx. 0.6-5.3 m (1.97-17.4 feet) Approx. 1.0-3.6 m (3.28-11.8 feet)ISO80 Approx. 0.6-1.5 m (1.97-4.92 feet) Approx. 1.0m (3.28 feet)ISO100 Approx. 0.6-1.6 m (1.97-5.24 feet) Approx. 1.0-1.1 m (3.28-3.61 feet)ISO200 Approx. 0.6-2.3 m (1.97-7.54 feet) Approx. 1.0-1.6 m (3.28-5.25 feet)ISO400 Approx. 0.6-3.3 m (1.97-10.8 feet) Approx. 1.0-2.2 m (3.28-7.22 feet)ISO800 Approx. 0.8-4.7 m (2.62-15.4 feet) Approx. 1.0-3.2 m (3.28-10.5 feet)ISO1600 Approx. 1.15-6.7 m (3.77-22.0 feet) Approx. 1.0-4.5 m (3.28-14.8 feet)[INTELLIGENT ISO](→96)ISOMAX400 Approx. 0.6-3.3 m (1.97-10.8 feet) Approx. 1.0-2.2 m (3.28-7.22 feet)ISOMAX800 Approx. 0.8-4.7 m (2.62-15.4 feet) Approx. 1.0-3.2 m (3.28-10.5 feet)ISOMAX1600 Approx. 1.15-6.7 m (3.77-22.0 feet) Approx. 1.0-4.5 m (3.28-14.8 feet)[HIGH SENS.](→66)ISO1600-ISO6400 Approx. 1.15-13.5 m (3.77-44.3 feet) Approx. 1.0-9.1 m (3.28-29.9 feet)[FLASH BURST](→67)ISO100-ISO3200 Approx. 0.6-3.4 m (1.97-11.2 feet) Approx. 1.0-2.3 m (3.28-7.54 feet)●Do not put your hands over the light-emitting area of the flash (→9, 10) or look at itfrom close range (a few centimeters away).Do not use the flash at close distances to other subjects (heat/light may damage subject).●Flash settings may be changed when changing Recording Mode.●Scene Mode flash settings are restored to default when Scene Mode is changed.●Edges of picture may become slightly dark if using flash at short distances withoutusing zoom (close to max. W). This may be remedied by using a little zoom.●If flash is to be emitted, flash type marks (e.g. ) will turn red when shutter button ispressed halfway.●No pictures may be taken if these marks (e.g. ) are flashing (flash is charging).●Insufficient flash reach may be due to inadequately set exposure or White Balance.●Flash effect may not be fully achieved with high shutter speeds.●Flash charging may take time if battery is low, or if using flash repeatedly.When you want to enlarge the subject, setting to [AF MACRO] ( ) enables you to takepictures at an even closer distance than the normal focus range (up to 3 cm (0.10 feet))for max. W).Display [MACRO MODE]Select [AF MACRO]Displayed for approx. 5 sec.Take a picturedisplayTaking close-up pictures without standing close to subject‘Tele macro’ functionUseful for taking close-up pictures of, for example, birds that may fly away if approached,or to blur background and emphasize subject.‘Tele macro’ operates automatically when Optical or Extra Optical Zoom ratios areclose to the maximum T setting (10x or above for Optical Zoom). The focus can bealigned for distances as close as 1 m (3.28 feet).Turn tomax. Tchanges to●Digital Zoom may also be used.●This function also operates when taking pictures inthe following Scene Modes. ( is not displayed)[FOOD], [CANDLE LIGHT], [BABY], [PET], [HIGHSENS.], [HI-SPEED BURST], [FLASH BURST],[PIN HOLE], [FILM GRAIN] , [HIGH DYNAMIC],[UNDERWATER]●It may take some time untildistant subjects come into focus.●When using ([INTELLIGENTAUTO] Mode), macro recordingcan be activated by just pointingthe camera at the subject. (whenis displayed)●[AF MACRO] automaticallyactivates when [AF MODE] is setto (AF Tracking). ( is notdisplayed.)