116 VQT2R48 VQT2R48 117Capturing still pictures from motion picturesPlayback Mode:Splitting up motion picturesPlayback Mode:Save a scene from a motion picture as a still picture.Display the picture that you want to capture as a still pictureby pausing a motion picture during playback▲: Pause/playback◄: Fast rewind (2 steps)(during pause) single-frame rewind►: Fast forward (2 steps)(during pause) single-frame forwardCapture still pictureSelect [YES]A still picture is created.●The picture size is 2M . (Except for still pictures captured from motion pictureswhere the [REC QUALITY] is [VGA] or [QVGA], when the size is 0.3M .)●The picture quality becomes slightly lower because of the picture quality setting of theoriginal motion picture.●It may not be possible to capture still pictures from motion pictures that were recordedwith a different camera.A single motion picture can be split into 2 parts. This is convenient when you want to keepjust the necessary scenes, or if you wish to delete unnecessary scenes to increase freespace on your card, such as when traveling.Select [VIDEO DIVIDE] from [PLAYBACK] menu (→20)Select the motion picture to split with ◄►, and then press[MENU/SET]Play back the motion picture and pause at the place to split▲: Pause / playback◄: Fast rewind (2 steps)(during pause) single-frame rewind►: Fast forward (2 steps)(during pause) single-frame forwardDecide the point to split the motion pictureSelect [YES] The motion picture is split.• The original motion picture that was splitdoes not remain.(There will only be the 2 motion pictures that werecreated after the split.)• Splitting may take some time.• After setting, press to return to the menu screen.●Use a sufficiently charged battery (→11) or AC adaptor (optional) and DC coupler(optional).●When there is extremely little free space left on the card, it may not be possible to splitthe motion picture.●The following motion pictures cannot be split.• Motion pictures set as [FAVORITE]• Motion pictures protected by [PROTECT]●Splits cannot be made that would leave a motion picture of less than 1 second after the split.●Split points are set at time increments of 0.5 seconds. (There may be a slight differencefrom the specified point)●During splitting, do not turn off the camera’s power or remove the card or battery. If youdo so, the motion picture will be deleted.●It may not be possible to split motion pictures that were recorded with a different camera.●[PRINT SET] is cancelled after splitting.This function is not available in the DMC-TZ8/DMC-ZS5. [VIDEO DIVIDE] is not available in the DMC-TZ8/DMC-ZS5.