Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Also see for Lumix DMC-TZ10: Operating instructions Operating instructions Basic operating instructions Basic operating instructions

Contents

96 VQT2R48 VQT2R48 97For [REC] menu setting procedures (→20)Using the [REC] menu (Continued)[QUALITY]Set quality of picture.■ Recording Mode:■ Settings: Fine (High quality, priority to picture quality)Standard (Standard quality, priority to the number of pictures)[ASPECT RATIO]Aspect ratio of still picture can be changed according to printing or playback format.■ Recording Mode:■ Settings:3423916Same as 4:3 TV or computer Same as normal film camera For playback on widescreen/high definition TV●Edges may be cut off when printing – be sure to check in advance.●In ([INTELLIGENT AUTO] Mode), (11.5M) and (10.5M) may be selectedby changing the [PICTURE SIZE].[INTELLIGENT ISO]Camera automatically adjusts ISO Sensitivity and shutter speed according to movementof subject to avoid blur. Higher ISO Sensitivity reduces subject blur and jitter but canincrease interference. Please select maximum ISO Sensitivity according to table below.■ Recording Mode:■ Settings: [OFF] / / /Setting guideMovement of subject Slow FastISO Sensitivity Low HighShutter speed Slow FastInterference Low High●Slow-moving subject ●Fast-moving subjectISO Sensitivity 200(Shutter speed 1/30)ISO Sensitivity 800(Shutter speed 1/125)●Shutter speed and ISO Sensitivity are displayed in the screen for a few seconds afterrecording.●If interference becomes noticeable, we recommend reducing the setting, or setting[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.●Blurring may occur depending on brightness, size, position, and speed of movement ofthe subject (e.g. if subject is too small, is on edge of picture, or starts moving as soonas shutter button is pressed).●Scope of flash recording (→48)[SENSITIVITY]Set ISO Sensitivity (sensitivity to lighting) manually.We recommend higher settings to take clear pictures in darker locations.■ Recording Mode:■ Settings: [AUTO] / [80] / [100] / [200] / [400] / [800] / [1600]Setting guide[SENSITIVITY] [80] [1600]Location(recommended)Bright(outdoors) DarkShutter speed Slow FastInterference Low High●[AUTO] is automatically set in a range up to 400 (1000 when flash is used) based onsubject movement and brightness.●Scope of flash recording (→48)●Cannot be set when [INTELLIGENT ISO] is used ( is displayed)●If interference becomes noticeable, we recommend reducing the setting, or setting[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.