Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Also see for Lumix DMC-TZ10: Operating instructions Operating instructions Basic operating instructions Basic operating instructions

Contents

102 VQT2R48 VQT2R48 103For [REC] menu setting procedures (→20)Using the [REC] menu (Continued)[I.EXPOSURE]Automatically adjusts contrast and exposure to give more lifelike colours when there issignificant contrast between background and subject.■ Recording Mode:■ Settings: [OFF]/[LOW]/[STANDARD]/[HIGH]●[LOW], [STANDARD] and [HIGH] indicate the amount of correction.●If the setting is other than [OFF], is displayed on the screen.●When [I.EXPOSURE] works, the colour of changes.●Even if [SENSITIVITY] is set to [80] or [100], when [I.EXPOSURE] is activated, picturesmay be taken at a higher sensitivity than the setting.●Correction effects may not be achieved under certain conditions.[MIN. SHTR SPEED]Sets shutter speed to minimum. We recommend using slower shutter speeds to takebrighter pictures in dark locations.■ Recording Mode:■ Settings: [AUTO] [1/250] [1/125] [1/60] [1/30] [1/15] [1/8] [1/4] [1/2] [1]●Slower shutter speeds allow for brighter pictures but increase risk of jitter, so werecommend using a tripod and the self-timer.●As still pictures may become dark when using faster values such as [1/250], werecommend that still pictures are taken in bright locations ( flashes red when shutterbutton is half-pressed if still picture will be dark).● displayed on screen for settings other than [AUTO].[BURST]Enables a rapid succession of still pictures to be taken. Succession of still pictures takenwhile shutter button is held down.■ Recording Mode:■ Settings:[BURST] setting Speed No. of pictures∗[OFF] No burst(Burst) 2.3 pictures/sec. Fine: Max. 3Standard: Max. 5∗ When using self-timer: Fixed at 3 pictures●Focus, exposure and White Balance are fixed in the first picture.●Burst speed may be reduced if [SENSITIVITY] is set to high, or if shutter speed isreduced in darker locations.●When burst setting is used, flash is set to [FORCED FLASH OFF], and [AUTOBRACKET], [MULTI ASPECT], and [AUDIO REC.] settings are cancelled.●When burst is performed with the built-in memory, writing will take some time.●Settings will be stored even if power is turned off.●Auto Review performed regardless of [AUTO REVIEW] setting.●Burst is not available in the Scene Modes [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], [PIN HOLE], [FILM GRAIN], [HIGHDYNAMIC],and [PHOTO FRAME].●Using the [HI-SPEED BURST] Scene Mode allows a faster succession of still picturesto be taken. [FLASH BURST] is convenient to take continuous still pictures using flashin dark places.[I.RESOLUTION]Super resolution technology can be used to record still pictures with sharper outlines andclearer resolution. Also, when [i.ZOOM] is set, the zoom ratio can be increased to about1.3 with almost no deterioration of picture quality.■ Recording Mode:■ Settings: [OFF]/[ON]/[i.ZOOM]●About i.ZOOM (→41)●The setting is fixed to [i.ZOOM] in ([INTELLIGENT AUTO] Mode) and([CLIPBOARD] Mode).●The setting is fixed to [ON] in [HIGH SENS.] and [HI-SPEED BURST] Scene Modes,[OFF] in [FLASH BURST] and [PIN HOLE] Scene Modes, and [i.ZOOM] in other SceneModes.