Panasonic Lumix DMC-TZ100 Operating Instructions Manual

Also see for DMC-TZ100: Creating still pictures guide Basic operating instructions Operating instructions

115SQW0550Recording modeTaking pictures according to the scene (Scene Guide Mode)For the setting procedures for the Scene Guide Mode, refer to (→112)14: [Warm Glowing Nightscape]●Tripod, self-timer recommended.●The shutter may remain closed after taking the picture. This is due to signal processing and is not amalfunction.●Noise may become visible when you take pictures in dark places.15: [Artistic Nightscape]●Tripod, self-timer recommended.●The shutter may remain closed after taking the picture. This is due to signal processing and is not amalfunction.●Noise may become visible when you take pictures in dark places.16: [Glittering Illuminations]●Tripod, self-timer recommended.●The shutter may remain closed after taking the picture. This is due to signal processing and is not amalfunction.●Noise may become visible when you take pictures in dark places.17: [Handheld Night Shot]●After the shutter button has been pressed, do not move the camera during the burst operation.●The angle of view becomes narrow slightly.18: [Clear Night Portrait]● TZ100/TZ101Open the flash.●Tripod, self-timer recommended.●When [Clear Night Portrait] is selected, keep the subject still for about 1 second after taking thepicture.●The shutter may remain closed after taking the picture. This is due to signal processing and is not amalfunction.●Noise may become visible when you take pictures in dark places.19: [Soft Image of a Flower]●Tripod, self-timer recommended.●For close-up recording, we recommend that you avoid using the flash.●When a subject is close to the camera, the effective focus range is significantly narrowed. Therefore,if the distance between the camera and the subject is changed after focusing on the subject, it maybecome difficult to focus on it again.●When you take pictures at close range, the resolution of the periphery of the picture may decreaseslightly. This is not a malfunction.