Panasonic Lumix DMC-TZ100 Operating Instructions Manual

Also see for DMC-TZ100: Creating still pictures guide Basic operating instructions Operating instructions

138SQW0550Picture Quality and colouring SettingsAdjusting the White BalanceBracket recording using White BalanceBracket settings are performed based on the fine adjustment values for White Balance,and three pictures with different colouring are automatically recorded when the shutterbutton is pressed once.1 TZ100/TZ101Perform fine adjustments of the White Balance instep 2 of “Performing White Balance fine adjustments”(→137) and rotate the rear dial to perform the BracketsettingTZ80/TZ81Perform fine adjustments of the White Balance instep 2 of “Performing White Balance fine adjustments”(→137) and rotate the control dial to perform theBracket settingClockwise: Horizontal ([A] to [B])Counterclockwise: Vertical ([G] to [M])• You can also set the bracket by touching [ ]/[ ].BKTBKT2 Press [MENU/SET]3 Press [MENU/SET] to finalise the setting• You can also press the shutter button halfway to set the White Balance.●When the White Balance Bracket is set, [BKT] appears on the White Balance icon.● TZ100/TZ101When the camera is turned off (Including [Sleep Mode]), the White Balance Bracket setting iscancelled.● TZ80/TZ81When the camera is turned off (Including [Auto Power Off]), the White Balance Bracket setting iscancelled.●This function is not available in the following cases:• Panorama Shot Mode• [Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower](Scene Guide Mode)• When using [Burst]• When recording 4K photos• When using [Auto Bracket]• When recording using [Post Focus]• When taking still pictures while a motion picture is being recorded• When [Quality] is set to [ ], [ ] or [ ]• When [HDR] is set to [ON]• TZ100/TZ101 When [Multi Exp.] is set• When using [Time Lapse Shot]